CD74HCT4051M Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Around -55°C~125°C TA is the extended operating temperature. A total of 16 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 16 series. There are 1 circuits in this multiplexer. Use 74HCT4051 to search for variants of the digital switches. In this multiplexer, the internal resistance is 130Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 1V voltage attached. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. It can operate from 5V operating voltages. It is possible to operate 8 inputs. There are various bandwidths available for data transfer. It has a Drain to Source resistance of 40Ohm ohms.

CD74HCT4051M Features

1 Channels
Bandwidth: 180MHz
Drain-to-Source resistance: 40Ohm

CD74HCT4051M Applications

There are a lot of Texas Instruments CD74HCT4051M Analog Switches & Multiplexers ICs applications.

• Channel Banks
• Digital cross connects (DSX-1)
• Cross Connects
• Microprocessor controlled systems
• Low-Voltage
• Medical
• PDH Multiplexers
• Access Concentrators
• Digital access cross connects
• Cellular phones