ADG1233YRUZ-REEL7 Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 16 terminations. A 3 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. Try searching for ADG1233 variants of the analog switch ic. Analog switches have 190Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 16.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 5V voltage fed to the electrical part below 5V. It would be sufficient to run this analogue multiplexer with 260μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 475μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. The voltage should be at least 5V if you are using dual power supplies. Operating voltages of 12V are compatible with the electrical part. In 900MHz-bandwidths, data can be transferred. This electronic part has additional features, such as: ALSO OPERATES AT 12V SINGLE SUPPLY. Multiplexer ics with 6 outputs are available.

ADG1233YRUZ-REEL7 Features

3 Channels
Switch Circuit: SPDT
260μA Supply Current
Bandwidth: 900MHz
Additional Features: ALSO OPERATES AT 12V SINGLE SUPPLY

ADG1233YRUZ-REEL7 Applications

There are a lot of Analog Devices Inc.
ADG1233YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems