The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 8:1. An extended operating temperature of -40°C~105°C TA degrees Celsius. The total number of terminations is 16. By its 8 channels, the electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. There are 1 circuits in this switch device. Using the ADG1308 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 210Ohm. The datasheets for the 16 pins explain the functions. Multiplexer or Switches is a typical switch device. A voltage higher than 16.5V should not normally be supplied to the switches. In order for the electronic part to function properly, the lowest voltage should be 5V. For this multiplexer to operate, 2nA current would be sufficient. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIf you are using dual power supplies, you should attach at least 5V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A voltage of 15V can be used to operate the electronic component. There are 8 inputs to be operated. There are 500MHz bandwidths for data transfer. Resistivity from Drain to Source is 130Ohm for this electronic part.
ADG1308BRUZ Features
8 Channels 2nA Supply Current Bandwidth: 500MHz Drain-to-Source resistance: 130Ohm
ADG1308BRUZ Applications
There are a lot of Analog Devices Inc. ADG1308BRUZ Analog Switches & Multiplexers ICs applications.