DG211EUE+ Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. The analog switch ics are built using SPST - NC switching circuits. A total of 4 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with DG211. A 175Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. Multiplexers should not be powered above 18V in normal situations. Analogue multiplexer with a Dual supply type that is cost-effective. 4.5V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 20μA. When the digital multiplexer is charged above 400μA, damage can occur. If put voltage greater than 18V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 4.5V.

DG211EUE+ Features

1 Channels
Switch Circuit: SPST - NC
20μA Supply Current

DG211EUE+ Applications

There are a lot of Maxim Integrated DG211EUE+ Analog Switches & Multiplexers ICs applications.

• Battery-powered systems
• HDTV
• Switching Systems
• SONET/SDH ADM
• PDAs
• SONET
• PBXs
• Medical
• Digital access cross connects
• DSLAMs