Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG1312YRZ-REEL7

  • ADG1312YRZ-REEL7
  • ADG1312YRZ-REEL7

ADG1312YRZ-REEL7

ADG1312YRZ-REEL7

Analog Devices Inc.

125ns, 50ns SPST - NO 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1312 16 Pins 10nA 15V 16-SOIC (0.154, 3.90mm Width)

SOT-23

ADG1312YRZ-REEL7 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 200Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 4.8mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG1312
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 12V
Number of Channels 4
Interface Parallel
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Operating Supply Current 220μA
Power Dissipation 4.8mW
Max Supply Current 380μA
Throw Configuration SPST
Turn On Delay Time 125 ns
Supply Type Dual, Single
Bandwidth 600MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 50 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 200Ohm
Min Dual Supply Voltage 5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 80 dB
Current - Leakage (IS(off)) (Max) 10nA
Channel Capacitance (CS(off), CD(off)) 5pF 5pF
On-state Resistance Match-Nom 5Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 125ns, 50ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 5 Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 180ns
Switch-off Time-Max 60ns
Voltage - Supply, Dual (V±) ±15V
Height Seated (Max) 1.75mm
Length 9.9mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $3.806572 $3.806572
10 $3.591105 $35.91105
100 $3.387835 $338.7835
500 $3.196071 $1598.0355
1000 $3.015162 $3015.162
ADG1312YRZ-REEL7 Product Details

ADG1312YRZ-REEL7 Overview


This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~105°C TA degrees Celsius. In total, there have been 16 terminations. A 4 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for ADG1312 variants of the analog switch ic. Analog switches have 200Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 16.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 5V voltage fed to the electrical part below 5V. It would be sufficient to run this analogue multiplexer with 220μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 380μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. The voltage should be at least 5V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating voltages of 12V are compatible with the electrical part. In 600MHz-bandwidths, data can be transferred.

ADG1312YRZ-REEL7 Features


4 Channels
Switch Circuit: SPST - NO
220μA Supply Current
Bandwidth: 600MHz


ADG1312YRZ-REEL7 Applications


There are a lot of Analog Devices Inc.
ADG1312YRZ-REEL7 Analog Switches & Multiplexers ICs applications.


  • Ultrasound
  • Audio and video switching
  • Automatic test equipment
  • Precision data acquisition
  • Battery-powered systems
  • Sample-and-hold systems
  • Communication systems
  • Data Acquisition Systems
  • Relay Replacement
  • Battery Powered Systems

Related Part Number

ADG711BRZ-REEL7
Analog Devices Inc.
ADG711BRZ-REEL7
$0 $/piece
ADG212AKPZ
Analog Devices Inc.
ADG212AKPZ
$0 $/piece
MAX4663CAE+T
Maxim Integrated
MAX4663CAE+T
$0 $/piece
TS12A4515DR
Texas Instruments
TS12A4515DR
$0 $/piece
MPQ2735GG-AEC1-Z
Monolithic Power Systems Inc.
MPQ2735GG-AEC1-Z
$0 $/piece
ADG1633BRUZ-REEL7
Analog Devices Inc.
ADG1633BRUZ-REEL7
$0 $/piece
MC14052BFELG
Rochester Electronics, LLC
MC14052BFELG
$0 $/piece
MC74HC4852ADG
ON Semiconductor
MC74HC4852ADG
$0 $/piece
ADG5234BRUZ-RL7
Analog Devices Inc.
ADG5234BRUZ-RL7
$0 $/piece
MAX4528CUA+T
Maxim Integrated
MAX4528CUA+T
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News