Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG1313YRUZ-REEL7

  • ADG1313YRUZ-REEL7
  • ADG1313YRUZ-REEL7

ADG1313YRUZ-REEL7

ADG1313YRUZ-REEL7

Analog Devices Inc.

125ns, 50ns SPST - NO/NC 200Ohm Analog Switches BREAK-BEFORE-MAKE ADG1313 16 Pins 10nA 15V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG1313YRUZ-REEL7 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 200Ohm
Terminal Finish Matte Tin (Sn)
Subcategory Multiplexer or Switches
Max Power Dissipation 4.8mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG1313
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 12V
Number of Channels 4
Interface Parallel
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Operating Supply Current 220μA
Power Dissipation 4.8mW
Max Supply Current 380μA
Throw Configuration SPST
Turn On Delay Time 125 ns
Supply Type Dual, Single
Bandwidth 600MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 50 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 200Ohm
Min Dual Supply Voltage 5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 80 dB
Current - Leakage (IS(off)) (Max) 10nA
Channel Capacitance (CS(off), CD(off)) 5pF 5pF
On-state Resistance Match-Nom 5Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 125ns, 50ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 5 Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 180ns
Switch-off Time-Max 60ns
Voltage - Supply, Dual (V±) ±15V
Height Seated (Max) 1.2mm
Length 5mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $3.075908 $3.075908
10 $2.901800 $29.018
100 $2.737547 $273.7547
500 $2.582592 $1291.296
1000 $2.436407 $2436.407
ADG1313YRUZ-REEL7 Product Details

ADG1313YRUZ-REEL7 Overview


Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~105°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO/NC switching circuit is used to build these analog multiplexers. Try searching with ADG1313 if you're looking for variants. There is 200Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 220μA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 380μA. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 5V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 12V operating voltages are supported by the electronic component. A 600MHz-bandwidth can be used for data transfer.

ADG1313YRUZ-REEL7 Features


4 Channels
Switch Circuit: SPST - NO/NC
220μA Supply Current
Bandwidth: 600MHz


ADG1313YRUZ-REEL7 Applications


There are a lot of Analog Devices Inc.
ADG1313YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.


  • Transmit
  • Low-Voltage
  • Isolation
  • Medical
  • Imaging
  • Ultrasound
  • Audio and video switching
  • Automatic test equipment
  • Precision data acquisition
  • Battery-powered systems

Related Part Number

ISL8324IB
Rochester Electronics, LLC
ISL8324IB
$0 $/piece
MC74LVXT4053DTG
ON Semiconductor
MC74LVXT4053DTG
$0 $/piece
MC74LVX8053MG
Rochester Electronics, LLC
MC74LVX8053MG
$0 $/piece
DG408DY-T1-E3
Vishay Siliconix
DG408DY-T1-E3
$0 $/piece
ADG822BRM
Rochester Electronics, LLC
ADG822BRM
$0 $/piece
NLAS4051DR2G
Rochester Electronics, LLC
NLAS4051DR2G
$0 $/piece
74LVC2G3157DP-Q10J
Nexperia USA Inc.
74LVC2G3157DP-Q10J
$0 $/piece
MAX318CPA+
Maxim Integrated
MAX318CPA+
$0 $/piece
DG445DY-E3
Vishay Siliconix
DG445DY-E3
$0 $/piece
MPC507AU
Texas Instruments
MPC507AU
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News