DG445DY-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around -40°C~85°C TA extended. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. A SPST - NO switching circuit is used for these analog switches. Try searching for the analog switch ic with DG445 if you are looking for variants. As far as internal resistance is concerned, it has 85Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 13V. The switch device would be able to operate with 5μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. The voltage should be at least 7V if you are using dual power supplies. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Among the inputs that can be operated are the 4 inputs. It has a Drain to Source resistance of 50Ohm ohms.

DG445DY-E3 Features

1 Channels
Switch Circuit: SPST - NO
5μA Supply Current
Drain-to-Source resistance: 50Ohm

DG445DY-E3 Applications

There are a lot of Vishay Siliconix DG445DY-E3 Analog Switches & Multiplexers ICs applications.

• DVD-R
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• SONET
• ISDN NT1/TA
• Sample-and-hold systems
• Wireless Local Loop
• Medical
• Channelized and Unchannelized DS3 applications
• Power routing
• ATM