The electronic part can be shipped overseas conveniently because it is packaged in 14-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. Total terminations are 14. The electronic part delivers high-quality output through its 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. As part of its design, the 14 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SP4T switching circuits. There are 1 circuits in this switch device. ADG1404 can be used to search for analog multiplexer variants. It has an internal resistance of 1.8Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. Multiplexers should not be powered above 16.5V in normal situations. The digital multiplexer has a low cost Dual, Single supply. 4.5V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 170μA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. If you are using dual power supplies, you should attach at least 4.5V. There is a voltage range of 12V operating voltages for the electrical part. Among the inputs that can be operated are the 4 inputs. It is possible to transfer data over a 55MHz-bandwidth.
ADG1404YRUZ-REEL7 Features
4 Channels Switch Circuit: SP4T 170μA Supply Current Bandwidth: 55MHz
ADG1404YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1404YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
Channelized and Unchannelized DS3 applications
Precision test equipment
Digital cross connects (DSX-1)
Access Concentrators
FTTH
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
SDH/SONET multiplexers
Voice over IP/DSL – Integrated Access Devices, Smart