ADG1407BRUZ-REEL7 Overview

Shipping overseas is convenient due to the electrical component's packing in 28-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 8:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. There are 28 terminations totally. A high-quality output is provided by the electrical component's 8 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. It is injected into the electrical part body with 28 pins. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with ADG1407. This digital multiplexer has 11.5Ohm internal resistance. You can find the functions of the 28 pins in the datasheets. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 5V should be applied to the electronic component. The analogue multiplexer could operate on 150μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. The electronic component can function from 12V. There are 16 inputs to be operated. This switch operates within the bandwidth of 110MHz.

ADG1407BRUZ-REEL7 Features

8 Channels
150μA Supply Current
Bandwidth: 110MHz

ADG1407BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1407BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Multiplexers
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Central office
• MP3 players
• Channel Banks
• Switching Systems
• Optical Applications
• Battery Powered Systems
• Relay Replacement
• Data Acquisition Systems