ADG1408YRUZ Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. The circuits in this analogue multiplexer number 1. ADG1408 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 4Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. There should be 5V voltage fed to the electrical part below 5V. There is no problem with using dual supply voltage, but it should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating voltages of 12V are compatible with the electrical part. 60MHz-bandwidths can be used to transfer data between multiplexers. It can conduct 8-bit signals.

ADG1408YRUZ Features

8 Channels
Bandwidth: 60MHz
8-Bit

ADG1408YRUZ Applications

There are a lot of Analog Devices Inc. ADG1408YRUZ Analog Switches & Multiplexers ICs applications.

• Audio signal routing
• PDAs
• Central office
• Video signal routing
• Mechanical reed relay replacement
• Sample-and-hold systems
• HDTV
• SONET
• Digital cross connects (DSX-1)
• Avionics