ADG884BCPZ-REEL Overview

Shipping overseas is convenient due to the electrical component's packing in 10-VFDFN Exposed Pad, CSP. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. 10 terminations have been made so far. The electronic part provides high-quality output because it has 2 channels. An 2.7V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 10 series. The analog switch ics are built using SPDT switching circuits. Look for analog switch ic variants by searching with ADG884. Internally, this switch multiplexer has a resistance of 370mOhm. The datasheets for the 10 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 1.8V. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. This product is integrated with an analog integrated circuit (IC) of type AUDIO/VIDEO SWITCH. The electronic component can function from 5.5V. 18MHz bandwidths enable data to be transferred. The analogue multiplexer has 4 outputs.

ADG884BCPZ-REEL Features

2 Channels
Switch Circuit: SPDT
Bandwidth: 18MHz

ADG884BCPZ-REEL Applications

There are a lot of Analog Devices Inc. ADG884BCPZ-REEL Analog Switches & Multiplexers ICs applications.

• Intelligent PBX
• Industrial and process control systems
• Switching Systems
• Battery-powered systems
• High-Voltage
• ISDN NT1/TA
• Avionics
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Digital Cross-Connects
• DSLAMs