Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG1412YRUZ-REEL7

  • ADG1412YRUZ-REEL7
  • ADG1412YRUZ-REEL7

ADG1412YRUZ-REEL7

ADG1412YRUZ-REEL7

Analog Devices Inc.

150ns, 120ns SPST - NO 1.8Ohm Analog Switches BREAK-BEFORE-MAKE ADG1412 16 Pins 550pA 5V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG1412YRUZ-REEL7 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 1.8Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 4.97mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG1412
Output SEPARATE OUTPUT
Pin Count 16
Operating Supply Voltage 12V
Polarity Non-Inverting
Number of Channels 1
Interface Parallel
Max Supply Voltage 16.5V
Min Supply Voltage 5V
Test Frequency 1MHz
Operating Supply Current 220μA
Power Dissipation 4.97mW
Max Supply Current 380μA
Throw Configuration SPST
Turn On Delay Time 150 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 5V~16.5V ±4.5V~16.5V
Supply Type Dual, Single
Bandwidth 170MHz
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 120 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 1.8Ohm
Min Dual Supply Voltage 4.5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 80 dB
Current - Leakage (IS(off)) (Max) 550pA
Channel Capacitance (CS(off), CD(off)) 23pF 23pF
On-state Resistance Match-Nom 0.13Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 150ns, 120ns
Insertion Loss (dB) -0.35 dB
Charge Injection -20pC
Channel-to-Channel Matching (ΔRon) 100m Ω
Crosstalk -100dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 510ns
Switch-off Time-Max 380ns
Normal Position NO
Height Seated (Max) 1.2mm
Length 5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1,000 $4.24049 $4.24049
ADG1412YRUZ-REEL7 Product Details

ADG1412YRUZ-REEL7 Overview


Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~125°C TA are extended for operation. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching for the analog switch ic with ADG1412 if you are looking for variants. An switch multiplexer with 1.8Ohm internal resistance has a value of 1.8Ohm. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. 220μA current would be enough for this multiplexer to operate. The analogue multiplexer may be damaged if voltage is greater than 380μA. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 4.5V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Operating voltages of 12V are compatible with the electrical part. It is possible to operate 4 inputs. A 170MHz-bandwidth can be used for data transfer.

ADG1412YRUZ-REEL7 Features


  • 1 Channels

  • Switch Circuit: SPST - NO

  • 220μA Supply Current

  • Bandwidth: 170MHz



ADG1412YRUZ-REEL7 Applications


There are a lot of Analog Devices Inc. ADG1412YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

  • Battery Powered Systems

  • Industrial control systems

  • Data switching

  • Wireless Local Loop

  • E1 Multiplexer

  • Mechanical reed relay replacement

  • Channelized and Unchannelized DS3 applications

  • Low-Voltage

  • ISDN NT1/TA

  • Microprocessor controlled systems

Related Part Number

ADG5249FBCPZ-RL7
Analog Devices Inc.
ADG5249FBCPZ-RL7
$0 $/piece
ADG201HSKNZ
Analog Devices Inc.
ADG201HSKNZ
$0 $/piece
TS3A5018RGYR
Texas Instruments
TS3A5018RGYR
$0 $/piece
CD74HC4051M96
Texas Instruments
CD74HC4051M96
$0 $/piece
DG9421EDV-T1-GE3
Vishay Siliconix
DG9421EDV-T1-GE3
$0 $/piece
MAX4751EGE+T
Maxim Integrated
MAX4751EGE+T
$0 $/piece
MAX4521EEE+
Maxim Integrated
MAX4521EEE+
$0 $/piece
MAX337CAI+T
Maxim Integrated
MAX337CAI+T
$0 $/piece
ADG608BRZ-REEL
Analog Devices Inc.
ADG608BRZ-REEL
$0 $/piece
MAX339MSE/PR3+T
Maxim Integrated
MAX339MSE/PR3+T
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News