ADG1422BCPZ-REEL7 Overview

Due to its 10-VFDFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~125°C TA. Totally, there are 10 terminations. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. It is part of the design of the 10 series that this electronic component is included. A SPST - NC switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Try searching with ADG1422 to find analog multiplexer variants. There is 2.4Ohm internal resistance in this digital multiplexer. The functions of 10 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 5V. A voltage higher than 190μA may cause damage to the switch multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. With dual power supplies, you should attach at least 5V. This electrical part is compatible with 12V operating voltages. The transfer of data can be performed over 180MHz bandwidths.

ADG1422BCPZ-REEL7 Features

1 Channels
Switch Circuit: SPST - NC
Bandwidth: 180MHz

ADG1422BCPZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1422BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Private Branch Exchange (PBX)
• E1 Multiplexer
• Cross Connects
• 65 V DACs
• Cable Modem
• DSUs
• Signal routing between systems
• Fiber to the Home
• Medical systems
• Digital access cross connects