ADG1411YRUZ Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. In Surface Mount, you'll find this switch device. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~125°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. The electronic part body is injected with 16 pins. Multiplexers built on a SPST - NC switching circuit are built. Try searching with ADG1411 if you're looking for variants. In this multiplexer, the internal resistance is 1.8Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 5V. When the digital multiplexer is charged above 380μA, damage can occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A voltage of 12V can be used to operate the electronic component. It is possible to operate 4 inputs. The transfer of data can be performed over 170MHz bandwidths.

ADG1411YRUZ Features

1 Channels
Switch Circuit: SPST - NC
Bandwidth: 170MHz

ADG1411YRUZ Applications

There are a lot of Analog Devices Inc. ADG1411YRUZ Analog Switches & Multiplexers ICs applications.

• PBX interfaces
• Multiplexers
• Data Acquisition Systems
• SONET
• Switching Systems
• Audio and video switching
• RGB switches
• Optical Applications
• DVD-R
• Access Concentrators