ADG1608BRUZ Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~125°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. There are 1 circuits in this multiplexer. Search with ADG1608 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 8Ohm. To find out what the 16 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 16V. 3.3V should be the lowest voltage fed to the electronic component. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. The voltage should be at least 3.3V if you are using dual power supplies. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. The electrical part can be operated at 12V voltage levels. There are 8 inputs to be operated. The transfer of data can be performed over 40MHz bandwidths. Resistivity from Drain to Source is 8Ohm for this electronic part.

ADG1608BRUZ Features

8 Channels
Bandwidth: 40MHz
Drain-to-Source resistance: 8Ohm

ADG1608BRUZ Applications

There are a lot of Analog Devices Inc. ADG1608BRUZ Analog Switches & Multiplexers ICs applications.

• Intelligent PBX
• Audio and video signal routing
• Automatic test equipment
• Fiber to the Home
• USB 1.1 signal switching circuits
• Digital cross connects (DSX-1)
• Data switching
• Cross Connects
• Microprocessor controlled systems
• Audio and video routing