MC14067BDWG Overview

Due to its 24-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Increasing operating temperature to around -55°C~125°C TA. In total, there have been 24 terminations. The electronic part delivers high-quality output through its 16 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. As part of the design of the 24 series, this electronic part has been incorporated into the system. A total of 1 circuits make up this switch device. Use MC14067B to search for variants of the digital switches. An switch multiplexer with 1.05kOhm internal resistance has a value of 1.05kOhm. To find out what the 24 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 18V voltage to the switch device. The digital multiplexer has a low cost Dual supply. The lowest voltage fed to the electronic component should be 3V. This multiplexer would work with 360nA current. This analogue multiplexer requires a voltage of 3V~18V when it drains from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. Operating 16 inputs is required. This switch operates within the bandwidth of 15MHz.

MC14067BDWG Features

16 Channels
360nA Supply Current
Bandwidth: 15MHz

MC14067BDWG Applications

There are a lot of ON Semiconductor MC14067BDWG Analog Switches & Multiplexers ICs applications.

• Audio/video switches
• Avionics test equipment
• Industrial and process control systems
• Battery Powered Instruments
• Avionics
• Sample-and-hold systems
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Audio and video signal routing
• Ultrasound
• High reliability control systems