Shipping overseas is convenient due to the electrical component's packing in 16-VQFN Exposed Pad, CSP. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. By its 4 channels, the electronic component provides high-quality output. A SPST - NO/NC switching circuit is used to build these analog multiplexers. The multiplexer consists of 4 circuits. Try searching with ADG1613 to find analog multiplexer variants. There is 1.1Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. The digital multiplexer has a low cost Dual, Single supply. 3.3V is the lowest voltage that should be fed to the electronic electronic part. It may damage the digital multiplexer if the voltage is higher than 480μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 8V. A dual power supply should have at least 3.3V voltage attached. The 4 inputs need to be operated in order to work. There are various bandwidths available for data transfer. The switches should not operate in an environment where the temperature is higher than 125°C. 4 outputs are included in the analogue multiplexer. Suppliers offer 16-LFCSP-VQ (4x4) packages.