ADG1633BRUZ Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 16 terminations. A 1 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. Try searching for ADG1633 variants of the analog switch ic. Analog switches have 4.5Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 16V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 3.3V voltage fed to the electrical part below 3.3V. The switch multiplexer may be damaged if it is exposed to voltage greater than 480μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 8V. The voltage should be at least 3.3V if you are using dual power supplies. In order to operate the 3 inputs, there are several steps to follow. In 117MHz-bandwidths, data can be transferred. Resistivity from Drain to Source is 4.5Ohm for this electronic part. Multiplexer ics with 6 outputs are available.

ADG1633BRUZ Features

1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 109MHz
Bandwidth: 117MHz
Drain-to-Source resistance: 4.5Ohm

ADG1633BRUZ Applications

There are a lot of Analog Devices Inc.
ADG1633BRUZ Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems