ADG412BRZ-REEL Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. A 4 channel electronic part produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. Based on SPST - NO switching circuits, these analog multiplexers work. ADG412 can be used to search for analog multiplexer variants. A 35Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 25V to a switch device. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 5V voltage fed to the electrical part below 5V. An operating current of 100pA would be sufficient for this switch device. The analogue multiplexer may be damaged if voltage is greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIt is recommended that you attach at least 13.5V to your dual power supply. It can operate from 12V operating voltages. Additional features include: ALSO OPERATE WITH 12V SINGLE SUPPLY.

ADG412BRZ-REEL Features

4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY

ADG412BRZ-REEL Applications

There are a lot of Analog Devices Inc. ADG412BRZ-REEL Analog Switches & Multiplexers ICs applications.

• Remote wireless modules
• Cellular phones
• Sample hold systems
• Audio and video routing
• SONET/SDH ADM
• Transmit
• Private Branch Exchange (PBX)
• Frame Relay Equipment
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Audio signal routing