ADG412BRZ-REEL7 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. There is an electrical component included in the 16 series. These analog multiplexers are built based on SPST - NO switching circuits. Try searching for ADG412 variants of the analog switch ic. There is 35Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 25V in normal situations. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 5V. 100pA current would be enough for this multiplexer to operate. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VYou should attach at least 13.5V voltage if you are using dual power supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The electrical part can be operated at 12V voltage levels. Don’t miss additional features of the electronic component such as: ALSO OPERATE WITH 12V SINGLE SUPPLY.

ADG412BRZ-REEL7 Features

4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY

ADG412BRZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG412BRZ-REEL7 Analog Switches & Multiplexers ICs applications.

• ISDN NT1/TA
• High reliability control systems
• Communication systems
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• E1 Multiplexer
• Precision test equipment
• Battery Powered Instruments
• Industrial and process control systems
• Signal routing between systems
• Routers