ADG413BNZ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. This electrical component is included in the 16 series of products. The analog switch ics are built using SPST - NO/NC switching circuits. ADG413 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 35Ohm. Please refer to the datasheets for 16 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 25V voltage to the switch device. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 5V. It may damage the digital multiplexer if the voltage is higher than 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. The voltage should be at least 13.5V if you are using dual power supplies. Operating voltages of 12V are compatible with the electrical part. The Drain to Source resistance of this electronic component is 35Ohm.

ADG413BNZ Features

4 Channels
Switch Circuit: SPST - NO/NC
Drain-to-Source resistance: 35Ohm

ADG413BNZ Applications

There are a lot of Analog Devices Inc. ADG413BNZ Analog Switches & Multiplexers ICs applications.

• High reliability control systems
• Microprocessor controlled systems
• DSUs
• Audio and video switching
• Automotive applications
• Relay Replacement
• Microprocessor Controlled Analog Systems
• Sample-and-hold systems
• Digital access cross connects
• Fiber In The Loop (FITL)