Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 16 pins. SPST - NO/NC switching circuits are used in these analog switch ics. ADG413 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 35Ohm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 5V. The switch device would be able to operate with 100pA current. It may damage the digital multiplexer if the voltage is higher than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. If you are using a dual power supply, you should attach at least 13.5V. It can operate from 12V operating voltages. Additional features include: ALSO OPERATE WITH 12V SINGLE SUPPLY.
ADG413BRUZ-REEL Features
4 Channels Switch Circuit: SPST - NO/NC 100pA Supply Current Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY
ADG413BRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG413BRUZ-REEL Analog Switches & Multiplexers ICs applications.