ADG417BR-REEL Overview

Due to its 8-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 8. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. As part of the design of the 8 series, this electronic part has been incorporated into the system. A SPST - NC switching circuit is used for these analog switches. Try searching for ADG417 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 35Ohm. The datasheets for the 8 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. In order for the electronic part to function properly, the lowest voltage should be 5V. For this switch, a dual supply voltage is feasible, but it must not exceed 15VFor dual power supplies, a voltage of at least 5V should be attached. This electrical part is compatible with 9V operating voltages.

ADG417BR-REEL Features

1 Channels
Switch Circuit: SPST - NC

ADG417BR-REEL Applications

There are a lot of Analog Devices Inc. ADG417BR-REEL Analog Switches & Multiplexers ICs applications.

• Cable PC
• T1/E1 Terminals
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Fiber to the Home
• PDH Multiplexers
• Cable Modem
• Residential Gateways, Home Gateway/Router
• Frame Relay Equipment
• Channel Banks