DG304AAK/883 Overview

Presented in 14-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -55°C~125°C TA extended. Totally, there are 14 terminations. If the voltage supply is 15V volts, the electrical component should be turned on and run. It is injected into the electrical part body with 14 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Internally, this switch multiplexer has a resistance of 50Ohm. The datasheets for the 14 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. 13V is the lowest voltage the electrical component should receive. Despite this switch device's dual supply capability, its voltage should not exceed 22V. A dual power supply should have at least 7V voltage attached. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Among the inputs that can be operated are the 2 inputs.

DG304AAK/883 Features

Switch Circuit: SPST - NO

DG304AAK/883 Applications

There are a lot of Vishay Siliconix DG304AAK/883 Analog Switches & Multiplexers ICs applications.

• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Fiber In The Loop (FITL)
• SONET
• Precision test equipment
• Modems
• PDAs
• Power routing
• Avionics and Military Systems
• Battery Powered Instruments
• Industrial