ADG417BRZ-REEL Overview

The electrical component comes in 8-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. Due to its 1 channels, the electrical component produces high-quality output. Unlike digital switches, these are based on SPST - NC switching circuits. It consists of 1 circuits. Try searching for ADG417 variants of the analog switch ic. A 35Ohm internal resistance characterizes this multiplexer. You can find the functions of the 8 pins in the datasheets. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. 5V is the lowest voltage the electrical component should receive. This multiplexer would work with 100pA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 15VIt is recommended that you attach at least 5V to your dual power supply. A voltage of 9V can be used to operate the electronic component. Among the inputs that can be operated are the 1 inputs. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. 1 outputs are included in the analogue multiplexer. There is a 8-SOIC package offered by suppliers. It can conduct in a 1-bit manner.

ADG417BRZ-REEL Features

1 Channels
Switch Circuit: SPST - NC
100pA Supply Current
1-Bit

ADG417BRZ-REEL Applications

There are a lot of Analog Devices Inc. ADG417BRZ-REEL Analog Switches & Multiplexers ICs applications.

• SDH/SONET multiplexers
• High speed data transmission line cards
• Precision instrumentation
• Digital cross connects (DSX-1)
• Ultrasound
• PDH Multiplexers
• Cell phones
• Relay Replacement
• Sample hold systems
• Microwave transmission systems