ADG431BR-REEL7 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NC switching circuits. Use ADG431 to search for variants of the digital switches. An switch multiplexer with 24Ohm internal resistance has a value of 24Ohm. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 25V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 5V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 100pA current. When the digital multiplexer is charged above 100nA, damage can occur. There is no problem with using dual supply voltage, but it should not exceed 22V. The voltage should be at least 13.5V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. There is a voltage range of 12V operating voltages for the electrical part. There is also ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY to look out for in this electronic part.

ADG431BR-REEL7 Features

4 Channels
Switch Circuit: SPST - NC
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY

ADG431BR-REEL7 Applications

There are a lot of Analog Devices Inc. ADG431BR-REEL7 Analog Switches & Multiplexers ICs applications.

• Audio signal routing
• Signal routing between systems
• Audio/video switches
• Audio and video routing
• Wireless Local Loop
• Cell phones
• Microprocessor controlled systems
• Fault Tolerant Systems
• PDAs
• Transmit