ADG739BRU-REEL7 Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Look for analog switch ic variants by searching with ADG739. A 4.5Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 2.7V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 10μA current. Analogue multiplexers require a 2.7V~5.5V voltage to drain from a single voltage supply. A voltage higher than 20μA may cause damage to the switch multiplexer. Integrated with an analog IC AUDIO/VIDEO SWITCH. Among the inputs that can be operated are the 8 inputs.

ADG739BRU-REEL7 Features

4 Channels
Switch Circuit: SP4T
10μA Supply Current
-3db Bandwidth: 100MHz

ADG739BRU-REEL7 Applications

There are a lot of Analog Devices Inc.
ADG739BRU-REEL7 Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)