Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG438FBRZ

  • ADG438FBRZ
  • ADG438FBRZ

ADG438FBRZ

ADG438FBRZ

Analog Devices Inc.

230ns, 130ns 270Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG438 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

SOT-23

ADG438FBRZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 400Ohm
Additional Feature FAULT PROTECTED; OVERVOLTAGE PROTECTION
Subcategory Multiplexer or Switches
Max Power Dissipation 2.6mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG438
Pin Count 16
Number of Channels 8
Interface Parallel
Number of Circuits 1
Max Supply Voltage 25V
Min Supply Voltage 15V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Operating Supply Current 50μA
Nominal Supply Current 50μA
Power Dissipation 2.6mW
Max Supply Current 200μA
Throw Configuration SPST
Propagation Delay 220 ns
Turn On Delay Time 250 ns
Number of Inputs 8
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 150 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 270Ohm Typ
High Level Output Current 20mA
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 93 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 3pF 22pF
On-state Resistance Match-Nom 8.1Ohm
Switch Time (Ton, Toff) (Max) 230ns, 130ns
Charge Injection 15pC
Channel-to-Channel Matching (ΔRon) 8.1 Ω
Crosstalk -93dB @ 100kHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 345ns
Drain to Source Resistance 400Ohm
Signal Current-Max 0.02A
Voltage - Supply, Dual (V±) ±15V
Height 1.5mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $72.514538 $72.514538
10 $68.409941 $684.09941
100 $64.537681 $6453.7681
500 $60.884604 $30442.302
1000 $57.438306 $57438.306
ADG438FBRZ Product Details

ADG438FBRZ Overview


Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~125°C TA. 16 terminations have been made so far. A electrical component with 8 channels is capable of high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. There are 1 circuits in this multiplexer. Try searching with ADG438 if you're looking for variants. In this multiplexer, the internal resistance is 400Ohm. To find out what the 16 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. It is recommended to use 15V as the lowest voltage for the electrical part. The switch device would be able to operate with 50μA current. Put voltage above 200μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. In order to operate the 8 inputs, there are several steps to follow. Check out the electrical component's additional features, such as the following: FAULT PROTECTED; OVERVOLTAGE PROTECTION. There is 400Ohm Drain to Source resistance on this electronic part.

ADG438FBRZ Features


8 Channels
50μA Supply Current
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION
Drain-to-Source resistance: 400Ohm

ADG438FBRZ Applications


There are a lot of Analog Devices Inc. ADG438FBRZ Analog Switches & Multiplexers ICs applications.

  • Switching Systems
  • SDH
  • Relay Replacement
  • 65 V DACs
  • USB 1.1 signal switching circuits
  • CSU
  • Routers
  • DSUs
  • Channel Banks
  • Cell phones

Related Part Number

74HCT4052DB,112
Nexperia USA Inc.
74HCT4052DB,112
$0 $/piece
74HC4067BQ-Q100J
Nexperia USA Inc.
74HC4067BQ-Q100J
$0 $/piece
MAX4992ELB+T
Rochester Electronics, LLC
MAX4992ELB+T
$0 $/piece
DG409DY-E3
Vishay Siliconix
DG409DY-E3
$0 $/piece
TMUX1102DBVR
Texas Instruments
TMUX1102DBVR
$0 $/piece
MAX4595EXK+T
Maxim Integrated
MAX4595EXK+T
$0 $/piece
MAX4582ESE+
Maxim Integrated
MAX4582ESE+
$0 $/piece
ADG706BRU
Rochester Electronics, LLC
ADG706BRU
$0 $/piece
HEF4052BTT,112
Nexperia USA Inc.
HEF4052BTT,112
$0 $/piece
NC7SB3157L6X
ON Semiconductor
NC7SB3157L6X
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News