ADG439FBR Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 4:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 16. A 4 channel electronic part produces high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the electrical part body. Unlike digital switches, these are based on SP4T switching circuits. There are 2 circuits in this switch device. ADG439 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 270Ohm. Please refer to the datasheets for 16 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. In order for the electronic part to function properly, the lowest voltage should be 15V. When the digital multiplexer is charged above 200μA, damage can occur. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. It is possible to operate 8 inputs. Additional features of the electronic component include: FAULT PROTECTED; OVERVOLTAGE PROTECTION.

ADG439FBR Features

4 Channels
Switch Circuit: SP4T
Additional Features: FAULT PROTECTED; OVERVOLTAGE PROTECTION

ADG439FBR Applications

There are a lot of Analog Devices Inc. ADG439FBR Analog Switches & Multiplexers ICs applications.

• Switching Systems
• ISDN NT1/TA
• Wireless Local Loop
• Fiber to the Home
• Cell phones
• Avionics and Military Systems
• Microwave transmission systems
• Automotive applications
• Audio signal routing
• Signal routing between systems