ADG451BR-REEL Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~85°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. These analog multiplexers are built based on SPST - NC switching circuits. The multiplexer consists of 4 circuits. Try searching for ADG451 variants of the analog switch ic. Analog switches have 5Ohm internal resistance. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 13.2V to a switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 5V. If put voltage greater than 500nA on the device, damage may be caused to the analogue multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 20V. If you are using dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. This electrical part is compatible with 12V operating voltages. There is also ALSO OPERATE WITH 12V SINGLE SUPPLY to look out for in this electronic part.

ADG451BR-REEL Features

1 Channels
Switch Circuit: SPST - NC
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY

ADG451BR-REEL Applications

There are a lot of Analog Devices Inc. ADG451BR-REEL Analog Switches & Multiplexers ICs applications.

• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Low-Voltage
• SONET
• Industrial and process control systems
• Power routing
• Channel Banks
• Cable Modem
• Precision data acquisition
• PBX interfaces
• Audio and video routing