ADG509AKR-REEL Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. 4:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 16 pins are injected into the electrical part body. A SP4T switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. Look for analog switch ic variants by searching with ADG509. As far as internal resistance is concerned, it has 450Ohm. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 16.5V voltage to the switch device. In order for the electronic part to function properly, the lowest voltage should be 10.8V. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. The voltage should be at least 10.8V if you are using dual power supplies. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. A 8 input needs to be operated.

ADG509AKR-REEL Features

1 Channels
Switch Circuit: SP4T

ADG509AKR-REEL Applications

There are a lot of Analog Devices Inc. ADG509AKR-REEL Analog Switches & Multiplexers ICs applications.

• SONET/SDH ADM
• Relay Replacement
• Digital access cross connects
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Medical systems
• Channel Banks
• Switching Systems
• Fault Tolerant Systems
• Audio and video routing
• Industrial and process control systems