Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG451BRZ-REEL7

  • ADG451BRZ-REEL7
  • ADG451BRZ-REEL7

ADG451BRZ-REEL7

ADG451BRZ-REEL7

Analog Devices Inc.

180ns, 140ns SPST - NC 5Ohm Analog Switches BREAK-BEFORE-MAKE ADG451 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

SOT-23

ADG451BRZ-REEL7 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 5Ohm
Additional Feature ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 17.5μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
[email protected] Reflow Temperature-Max (s) 30
Base Part Number ADG451
Pin Count 16
Operating Supply Voltage 9V
Polarity Non-Inverting
Number of Channels 4
Interface Parallel
Max Supply Voltage 12V
Min Supply Voltage 5V
Operating Supply Current 100pA
Power Dissipation 17.5μW
Max Supply Current 500nA
Throw Configuration SPST
Turn On Delay Time 180 ns
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 140 ns
Max Dual Supply Voltage 15V
On-State Resistance (Max) 5Ohm
Min Dual Supply Voltage 5V
High Level Output Current 100mA
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 65 dB
Neg Supply Voltage-Max (Vsup) -20V
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 37pF 37pF
On-state Resistance Match-Nom 0.3Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 180ns, 140ns
Charge Injection 20pC
Channel-to-Channel Matching (ΔRon) 100m Ω
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 220ns
Drain to Source Resistance 8Ohm
Normal Position NC
Voltage - Supply, Dual (V±) ±4.5V~20V
Height 1.75mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $7.01000 $7.01
500 $6.9399 $3469.95
1000 $6.8698 $6869.8
1500 $6.7997 $10199.55
2000 $6.7296 $13459.2
2500 $6.6595 $16648.75
ADG451BRZ-REEL7 Product Details

ADG451BRZ-REEL7 Overview


Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. A 5V voltage supply should turn on and run the electronic component. There are 16 pins injected into the electronic part body. These analog multiplexers are built based on SPST - NC switching circuits. Try searching with ADG451 if you're looking for variants. It has an internal resistance of 5Ohm. Datasheets for 16 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 5V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 100pA current. It may damage the digital multiplexer if the voltage is higher than 500nA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 15V. If you are using dual power supplies, you should attach at least 5V. Operating voltages range from 9V. Additional features of the electronic component include: ALSO OPERATE WITH 12V SINGLE SUPPLY. It has a Drain to Source resistance of 8Ohm ohms.

ADG451BRZ-REEL7 Features


4 Channels
Switch Circuit: SPST - NC
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY
Drain-to-Source resistance: 8Ohm

ADG451BRZ-REEL7 Applications


There are a lot of Analog Devices Inc. ADG451BRZ-REEL7 Analog Switches & Multiplexers ICs applications.

  • USB 1.1 signal switching circuits
  • Industrial
  • Battery Powered Instruments
  • Digital cross connects (DSX-1)
  • PBX interfaces
  • E1 Multiplexer
  • Public switching systems
  • Fiber to the Home
  • SDH/SONET multiplexers
  • Communications systems

Related Part Number

TS5A22364DGSR
Texas Instruments
TS5A22364DGSR
$0 $/piece
ISL84541IBZ
Renesas Electronics America Inc.
ISL84541IBZ
$0 $/piece
MAX4684ETB+T
Maxim Integrated
MAX4684ETB+T
$0 $/piece
ADG528ATQ
Analog Devices Inc.
ADG528ATQ
$0 $/piece
ADG431BN
Analog Devices Inc.
ADG431BN
$0 $/piece
MAX4521CEE+T
Maxim Integrated
MAX4521CEE+T
$0 $/piece
DG411HSDY-E3
Vishay Siliconix
DG411HSDY-E3
$0 $/piece
NLVVHC4053DTR2G
ON Semiconductor
NLVVHC4053DTR2G
$0 $/piece
ADG1436YCPZ-REEL
Analog Devices Inc.
ADG1436YCPZ-REEL
$0 $/piece
ADG202AKRZ-REEL
Analog Devices Inc.
ADG202AKRZ-REEL
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News