ADG452BNZ Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 16 pins are injected into the electrical part body. A SPST - NO switching circuit is used for these analog switches. Using the ADG452 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 5Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 5V is the lowest voltage the electrical component should receive. Putting voltage greater than 500nA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 15V. With dual power supplies, you should attach at least 5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The electrical part can be operated at 9V voltage levels. This electrical component also includes additional features such as ALSO OPERATE WITH 12V SINGLE SUPPLY. A Drain to Source resistance of 4Ohm is shown for this electronic part.

ADG452BNZ Features

4 Channels
Switch Circuit: SPST - NO
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY
Drain-to-Source resistance: 4Ohm

ADG452BNZ Applications

There are a lot of Analog Devices Inc.
ADG452BNZ Analog Switches & Multiplexers ICs applications.

• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions
• Cellular phones