MAX4509ESE+T Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. An injection of 16 pins is performed into the body of the electrical component. The analog switch ics are built using SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching for the analog switch ic with MAX4509 if you are looking for variants. The internal resistance of this digital multiplexer is 400Ohm. In normalcircumstances, users should not exceed 36V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 9V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. If you are using dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 12V voltage levels. There is also FAULT PROTECTED to look out for in this electronic part.

MAX4509ESE+T Features

4 Channels
Switch Circuit: SP4T
1μA Supply Current
Additional Features: FAULT PROTECTED

MAX4509ESE+T Applications

There are a lot of Maxim Integrated MAX4509ESE+T Analog Switches & Multiplexers ICs applications.

• Fault Tolerant Systems
• HDTV
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Optical Applications
• Communication systems
• PDAs
• PDH Multiplexers
• Microprocessor Controlled Analog Systems
• PCMCIA cards
• Cable PC