ADG453BR-REEL7 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 16. A electrical component with 4 channels is capable of high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. A SPST - NO/NC switching circuit is used to build these analog multiplexers. Try searching for ADG453 variants of the analog switch ic. It has an internal resistance of 5Ohm. The functions of 16 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. A cost-effective Dual, Single supply type analogue multiplexer. There should be 5V voltage fed to the electrical part below 5V. An operating current of 100pA would be sufficient for this switch device. Put voltage above 500nA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 15V. If you are using dual power supplies, you should attach at least 5V. This analog switch ic utilizes SEPARATE OUTPUT output. The electronic component can function from 9V. Additional features of the electronic component include: ALSO OPERATE WITH 12V SINGLE SUPPLY.

ADG453BR-REEL7 Features

4 Channels
Switch Circuit: SPST - NO/NC
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY

ADG453BR-REEL7 Applications

There are a lot of Analog Devices Inc. ADG453BR-REEL7 Analog Switches & Multiplexers ICs applications.

• Industrial and process control systems
• Video signal routing
• Sample hold systems
• SONET
• Medical Instrumentation
• Fiber to the Home
• Voice over IP/DSL – Integrated Access Devices, Smart
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Cell phones
• Digital cross connects (DSX-1)