ADG506AKPZ Overview

The electrical component comes in 28-LCC (J-Lead) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. 16:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. A total of 28 terminations have been recorded. This electronic part offers high-quality output due to its 16 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 28 series. A total of 1 circuits make up this switch device. Try searching for ADG506 variants of the analog switch ic. The internal resistance of this digital multiplexer is 300Ohm. Please refer to the datasheets for 28 pins functions. Multiplexers should not be powered above 16.5V in normal situations. It is recommended to use 10.8V as the lowest voltage for the electrical part. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. The voltage should be at least 10.8V if you are using dual power supplies. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. In order to operate the 16 inputs, there are several steps to follow. It has a Drain to Source resistance of 280Ohm ohms.

ADG506AKPZ Features

16 Channels
Drain-to-Source resistance: 280Ohm

ADG506AKPZ Applications

There are a lot of Analog Devices Inc. ADG506AKPZ Analog Switches & Multiplexers ICs applications.

• Cell phones
• Microprocessor Controlled Analog Systems
• Battery Powered Systems
• Medical Instrumentation
• SONET/SDH ADM
• Frame Relay Equipment
• Communication systems
• Digital Cross-Connects
• Ultrasound
• Battery Powered Instruments