ADG506AKRZ-REEL Overview

The electronic component is convenient to ship overseas because it is packed in a 28-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 16:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. A total of 28 terminations have been recorded. As a result of its 16 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. As part of the design of the 28 series, this electronic part has been incorporated into the system. There are 1 circuits in this switch device. Try searching for ADG506 variants of the analog switch ic. Analog switches have 300Ohm internal resistance. For functions related to 28 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. There should be 10.8V voltage fed to the electrical part below 10.8V. In order to operate this switch device, it would need a current of 600nA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. For dual power supplies, a voltage of at least 10.8V should be attached. 15V operating voltages are supported by the electronic component.

ADG506AKRZ-REEL Features

16 Channels
600nA Supply Current

ADG506AKRZ-REEL Applications

There are a lot of Analog Devices Inc. ADG506AKRZ-REEL Analog Switches & Multiplexers ICs applications.

• Video switching
• Automatic test equipment
• Mechanical reed relay replacement
• Central office
• Microprocessor controlled systems
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Battery Powered Systems
• PDH Multiplexers
• Digital cross connects (DSX-1)
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads