MC74HC4051ADG Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operational temperature extended around -55°C~125°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. Circuits number 1 make up this analogue multiplexer. Use MC74HC4051A to search for variants of the digital switches. It has an internal resistance of 100Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 40μA would be sufficient for this switch device. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. If you are using a dual power supply, you should attach at least 1V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Operating 8 inputs is required. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths.

MC74HC4051ADG Features

8 Channels
40μA Supply Current
Bandwidth: 80MHz

MC74HC4051ADG Applications

There are a lot of ON Semiconductor MC74HC4051ADG Analog Switches & Multiplexers ICs applications.

• Avionics
• High speed data transmission line cards
• Cross Connects
• Cable PC
• Relay replacements
• DVD-R
• Remote wireless modules
• Signal routing between systems
• Transmit
• Switching Systems