ADG507AKRZ Overview

The electronic component is convenient to ship overseas because it is packed in a 28-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 28 terminations. High-quality output is provided by the electronic component's 1 channels. A 15V voltage supply should turn on and run the electronic component. It is part of the design of the 28 series that this electronic component is included. It consists of 2 circuits. Try searching with ADG507 to find analog multiplexer variants. A 700Ohm internal resistance characterizes this multiplexer. To find out what the 28 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. There should be 10.8V voltage fed to the electrical part below 10.8V. For this multiplexer to operate, 600μA current would be sufficient. Putting voltage greater than 1.5mA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 16.5VIf you are using a dual power supply, you should attach at least 10.8V. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. The 16 inputs need to be operated in order to work.

ADG507AKRZ Features

1 Channels
600μA Supply Current

ADG507AKRZ Applications

There are a lot of Analog Devices Inc. ADG507AKRZ Analog Switches & Multiplexers ICs applications.

• Communications systems
• CSU
• Digital access cross connects
• T1/E1 Terminals
• Avionics
• Battery Powered Systems
• Automatic test equipment
• Ultrasound
• Transmit
• Industrial control systems