ADG513BRZ Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. A 4 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO/NC switching circuits. Try searching for ADG513 variants of the analog switch ic. Analog switches have 30Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 4.5V voltage fed to the electrical part below 4.5V. It would be sufficient to run this analogue multiplexer with 100pA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5.5V. The voltage should be at least 4.5V if you are using dual power supplies. Operating voltages of 5V are compatible with the electrical part.

ADG513BRZ Features

4 Channels
Switch Circuit: SPST - NO/NC
100pA Supply Current

ADG513BRZ Applications

There are a lot of Analog Devices Inc.
ADG513BRZ Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems