The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 8:1. Operational temperature extended around -40°C~125°C TA. Total terminations are 16. A electrical component with 8 channels is capable of high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 16 series. Circuits number 1 make up this analogue multiplexer. Try searching with ADG5208 to find analog multiplexer variants. It has an internal resistance of 160Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 40V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 9V. An operating current of 80μA would be sufficient for this switch device. A voltage higher than 130μA may cause damage to the switch multiplexer. There is no problem with using dual supply voltage, but it should not exceed 22V. A dual power supply should have at least 9V voltage attached. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. It can operate from 36V operating voltages. There are 54MHz bandwidths for data transfer. Don’t miss additional features of the electronic component such as: VIDEO APPLICATION.
ADG5208BRUZ-RL7 Features
8 Channels 80μA Supply Current -3db Bandwidth: 60MHz Bandwidth: 54MHz Additional Features: VIDEO APPLICATION
ADG5208BRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5208BRUZ-RL7 Analog Switches & Multiplexers ICs applications.