ADG526AKN Overview

The electronic part can be shipped overseas conveniently because it is packaged in 28-DIP (0.600, 15.24mm). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. There is 16:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 28 terminations. This electronic part offers high-quality output due to its 16 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. This electrical component is included in the 28 series of products. A total of 1 circuits make up this switch device. Search with ADG526 if you are looking for analog multiplexer variants. It has an internal resistance of 700Ohm. The functions of 28 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. 10.8V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1.5mA. A digital multiplexer may suffer damage if voltage is applied above 1.5mA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. In the case of dual power supplies, you should connect at least 10.8V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. There is a voltage range of 15V operating voltages for the electrical part.

ADG526AKN Features

16 Channels
1.5mA Supply Current

ADG526AKN Applications

There are a lot of Analog Devices Inc.
ADG526AKN Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems