This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. The operating temperature is extended to around 0°C~70°C TA. In total, 16 terminations have occurred. By its 1 channels, the electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. A 4 circuit is present in this switch device. MAX4523 can be used to search for analog multiplexer variants. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. The digital multiplexer has a low cost Dual, Single supply. There should be 2V voltage fed to the electrical part below 2V. 1μA current would be enough for this multiplexer to operate. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 6VIf you are using a dual power supply, you should attach at least 2V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. There is a voltage range of 6V operating voltages for the electrical part.
MAX4523CSE+T Features
1 Channels Switch Circuit: SPST - NO/NC 1μA Supply Current
MAX4523CSE+T Applications
There are a lot of Maxim Integrated MAX4523CSE+T Analog Switches & Multiplexers ICs applications.