ADG528AKNZ Overview

Packed in 18-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have the same number of circuits 8:1. The operating temperature is extended to around -40°C~85°C TA. 18 terminations have been made so far. A electrical component with 8 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. Into the electrical component body are injected 18 pins. A 1 circuit is present in this switch device. Look for analog switch ic variants by searching with ADG528. An switch multiplexer with 700Ohm internal resistance has a value of 700Ohm. Please refer to the datasheets for 18 pins functions. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. It is recommended that the electrical component receives a voltage of 10.8V. For this digital switch to work, 600μA current would suffice. If put voltage greater than 1.5mA on the device, damage may be caused to the analogue multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. When using dual power supplies, you should attach at least 10.8V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A 8 input needs to be operated. There is 280Ohm resistance between the Drain and Source on this part.

ADG528AKNZ Features

8 Channels
600μA Supply Current
Drain-to-Source resistance: 280Ohm

ADG528AKNZ Applications

There are a lot of Analog Devices Inc. ADG528AKNZ Analog Switches & Multiplexers ICs applications.

• High speed data transmission line cards
• Access Concentrators
• Precision instrumentation
• T1/E1 Terminals
• Precision data acquisition
• Avionics
• Cell phones
• DVD-R
• Data switching
• Ultrasound