ADG5412BRUZ-REEL7 Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 16 terminations. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. If you are looking for variants of the digital switch, trying search with ADG5412. It has an internal resistance of 10Ohm. For details about the functions of 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 40V in normal situations. A cost-effective Dual, Single supply type analogue multiplexer. It is recommended to use 9V as the lowest voltage for the electrical part. It may damage the digital multiplexer if the voltage is higher than 55μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. For dual power supplies, a voltage of at least 9V should be attached. There are SEPARATE OUTPUT outputs on this analog switch ic. The electrical component supports 4 inputs. A 160MHz-bandwidth can be used for data transfer.

ADG5412BRUZ-REEL7 Features

1 Channels
Switch Circuit: SPST - NO
Bandwidth: 160MHz

ADG5412BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG5412BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Video signal routing
• Isolation
• Transmit
• Sample-and-hold systems
• T1/E1 Terminals
• Fault Tolerant Systems
• Cross Connects
• PCMCIA cards
• Frame Relay Equipment
• Routers