ADG5413BFBRUZ-RL7 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~125°C TA extended. The analog switch ics are built using SPST - NO/NC switching circuits. It consists of 4 circuits. Look for analog switch ic variants by searching with ADG5413. The internal resistance of this digital multiplexer is 11.5Ohm. For functions related to 16 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 40V. An effective Dual, Single supply digital multiplexer. A low voltage of 9V should be applied to the electronic component. When the digital multiplexer is charged above 55μA, damage can occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. A dual power supply should have at least 9V voltage attached. The transfer of data can be performed over 160MHz bandwidths. A temperature above 125°C is not suitable for operation of the analogue multiplexer. Suppliers are offering a 16-TSSOP package.

ADG5413BFBRUZ-RL7 Features

Switch Circuit: SPST - NO/NC
-3db Bandwidth: 270MHz
Bandwidth: 160MHz

ADG5413BFBRUZ-RL7 Applications

There are a lot of Analog Devices Inc. ADG5413BFBRUZ-RL7 Analog Switches & Multiplexers ICs applications.

• Cellular phones
• Digital Cross-Connects
• Fiber In The Loop (FITL)
• Video switching
• Modems
• Transmit
• Microprocessor Controlled Analog Systems
• E1 Network Equipment
• Cable Modem
• Data switching