ADG613YRUZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -40°C~125°C TA are extended for operation. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 4 channels. With a 5V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Try searching with ADG613 if you're looking for variants. Internally, this switch multiplexer has a resistance of 115Ohm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. 2.7V is the lowest voltage the electrical component should receive. Putting voltage greater than 1μA on the multiplexer may cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. You should attach at least 2.7V voltage if you are using dual power supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. This switch operates within the bandwidth of 680MHz.

ADG613YRUZ Features

4 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 680MHz

ADG613YRUZ Applications

There are a lot of Analog Devices Inc. ADG613YRUZ Analog Switches & Multiplexers ICs applications.

• Battery-powered systems
• HDTV
• MP3 players
• Optical Applications
• Fault Tolerant Systems
• SONET
• Signal routing between systems
• Multiplexers
• Industrial
• PBXs