ADG708CRU Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 8:1. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 8 channels. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. An injection of 16 pins is performed into the body of the electrical component. A 1 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with ADG708. The internal resistance of this digital multiplexer is 4.5Ohm. To find out what the 16 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. A voltage higher than 5.5V should not normally be supplied to the switches. It is recommended that the electrical component receives a voltage of 1.8V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The electrical part can be operated at 5V voltage levels. The transfer of data can be performed over 55MHz bandwidths.

ADG708CRU Features

8 Channels
Bandwidth: 55MHz

ADG708CRU Applications

There are a lot of Analog Devices Inc. ADG708CRU Analog Switches & Multiplexers ICs applications.

• Audio and video routing
• High-Voltage
• ATM
• Channel Banks
• Video signal routing
• Fiber to the Home
• High speed data transmission line cards
• FTTH
• SONET
• Cable PC