DG408LDY Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. It has an internal resistance of 29Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. A digital multiplexer may suffer damage if voltage is applied above 500μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. In the case of dual power supplies, you should connect at least 3V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module.

DG408LDY Features

8 Channels

DG408LDY Applications

There are a lot of Vishay Siliconix
DG408LDY Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems