Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG711BRU

  • ADG711BRU
  • ADG711BRU

ADG711BRU

ADG711BRU

Analog Devices Inc.

11ns, 6ns (Typ) SPST - NC 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG711 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG711BRU Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 4Ohm
Terminal Finish Tin/Lead (Sn85Pb15)
Additional Feature CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 5μW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 4
Supply Voltage 3V
Terminal Pitch 0.65mm
Reach Compliance Code not_compliant
[email protected] Reflow Temperature-Max (s) 20
Base Part Number ADG711
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Power Supplies 3/5V
Number of Channels 4
Interface Parallel
Max Supply Voltage 5.5V
Min Supply Voltage 1.8V
Power Dissipation 5μW
Max Supply Current 1μA
Throw Configuration SPST
Turn On Delay Time 16 ns
Supply Type Single
Bandwidth 200MHz
Turn-Off Delay Time 10 ns
On-State Resistance (Max) 4Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 58 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 10pF 10pF
On-state Resistance Match-Nom 0.1Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 11ns, 6ns (Typ)
Charge Injection 3pC
Crosstalk -90dB @ 10MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 20ns
Switch-off Time-Max 12ns
Voltage - Supply, Single (V+) 1.8V~5.5V
Drain to Source Resistance 2.5Ohm
Normal Position NC
Height Seated (Max) 1.2mm
Length 5mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $2.910328 $2.910328
10 $2.745593 $27.45593
100 $2.590182 $259.0182
500 $2.443568 $1221.784
1000 $2.305253 $2305.253
ADG711BRU Product Details

ADG711BRU Overview


Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. A electrical component with 4 channels is capable of high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. Circuits based on SPST - NC switching are used to construct these analog switch ics. Search with ADG711 if you are looking for analog multiplexer variants. There is 4Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. It is recommended to use 1.8V as the lowest voltage for the electrical part. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There are 200MHz bandwidths for data transfer. Additional features of the electronic component include: CAN ALSO OPERATE WITH 5 V SUPPLY. There is 2.5Ohm resistance between the Drain and Source on this part.

ADG711BRU Features


4 Channels
Switch Circuit: SPST - NC
Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
Drain-to-Source resistance: 2.5Ohm

ADG711BRU Applications


There are a lot of Analog Devices Inc. ADG711BRU Analog Switches & Multiplexers ICs applications.

  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • Audio and video switching
  • Data switching
  • Cellular phones
  • E1 Network Equipment
  • Central office
  • Cable Modem
  • SONET/SDH ADM
  • Routers
  • Modems

Related Part Number

74LVC1G53GT,115
Nexperia USA Inc.
74LVC1G53GT,115
$0 $/piece
ADG711BRZ
Analog Devices Inc.
ADG711BRZ
$0 $/piece
MAX325EPA+
Maxim Integrated
MAX325EPA+
$0 $/piece
ADV3222ARZ-R7
Analog Devices Inc.
ADV3222ARZ-R7
$0 $/piece
ADG1612BRUZ
Analog Devices Inc.
ADG1612BRUZ
$0 $/piece
DG413DYZ
Renesas Electronics America Inc.
DG413DYZ
$0 $/piece
TC74HC4051AF(EL,F)
Toshiba Semiconductor and Storage
TC74HC4051AF(EL,F)
$0 $/piece
MAX4701ETE+T
Maxim Integrated
MAX4701ETE+T
$0 $/piece
ADG613YRUZ-REEL7
Analog Devices Inc.
ADG613YRUZ-REEL7
$0 $/piece
MAX4669CSE+T
Maxim Integrated
MAX4669CSE+T
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News